Slurry-residue dying machine can quickly dry the slurry-residue with 65% to 75% moisture into product with only 13% water. Coal (or biomass, natural gas, coal gas) is used as main fuel to warm the air as medium. The high temperature air flow will dry different kinds of materials in a short time. Electromagnetic speed adjustment system is used as transmission system, along with the automatic temperature controller. The product will maintain the original color, quality, taste and nutrient contents after being dried.
Material Processing Procedure: The material with about 60% to 75% water will be transmitted into the stirring drum dryer by screw conveyor to be concurrently dried. The material will be raised, spread and then moved helically. It will be fully stirred and scattered by the internal stirring blades, and then warmed up, dehydrated and transmitted out of the drum. The materials that is not fully dried will have heavier weight and therefore move slowly to be further dried. All materials that are fully dried will be transmitted out by the screw conveyor. The internal vibrating cleaning device will prevent the wet material from binding on the wall of drum roller.
Air Flow Process: The air will firstly be compressed and transmitted by the blower in to the hot air furnace, and then heated to the temperature of 600 to 650 °C. The draught fan pulls the air into the dyer to heat and dehydrate the material. After exchanging the heat for 3 levels, the air will be exhausted out of the dryer in the temperature of 50 to 60 °C, and then be aspirated through the cyclone dust collector and wet dust collector to reach the discharge standard.
|Models||Capacity（t/d）||Output（t/d）||Evaporation Capacity（t/h）||Moisture（%)||Dryer water(%)||Drying temperature（℃）||Total installed capacity（kw）||Weight（kg）||Area|
Fast drying and high efficiency
Slurry-Residue Drying Plant has the characteristics of high temperature resistance and can dry raw material with high temperature hot air.
Low consumption and low cost
Slurry-Residue Drying Plant has strong anti-overload capability, large processing capacity, low material consumption and low drying cost.
Low wear and long life
adopts "centering roller device", which makes the roller and roller ring have linear contact, which greatly reduces wear and power loss.
Low load, no block
new feeding and discharging device, which eliminates the blockage, discontinuity, unevenness and returning of rotary drum dryer, and reduces the load of the dust removal system.
If you are interested in our equipment, or if we have anything to help you, you can always call our customer service number: +86 15670626070 You can also communicate with us online, and, you can also leave a message below. We will be happy to serve you!